Leakage Current Clamp Meter DC Clamp Meter Tester with 600V DC Line Voltage Accuracy DC ±2% rdg±5dgt Measurement Range 0.0mA to 6.00A DC Clamp Leaker Double Shielding 0.1mA Resolution

Function:Measurement of DC leakage current, DC current, car leakage Power:Zn-Mn dry battery,6F22,9V DC，continuous use for 60 hours Test Mode:Clip-on CT，Magnetic modulation Clamp Size:25mm×30mm Range:0.0mA～6.00A DC Resolution:0.1mA DC Accuracy:0.0mA～300.0mA DC: ±2%rdg±5dgt （23℃±3℃，below 70%RH）: :0.30A～6.00A DC: ±2%rdg±5dgt Shield Type:Double shielding Display Mode:Four digits LCD display Dimension:LWH: 175mm×70mm×38mm LCD Dimension:35mm×21.5mm; display domain:32mm×15mm Sampling Rate:About 2 times/s Range Shift:0.0mA～6.00A DC Automatically Zero-Adjustment:Yes，calibrate zero before measuring Polarity Indication:Auto identified and display“—” Test Position:Tested wire in the jaw center Line Voltage:600V DC USB Interface:Data stored in the memory of the meter via USB upload to PC, or on-line monitoring Data Memory:99units，FULL blinks when the memory is full Peak Hold:Push HOLD without release, the meter will show the peak value during the pushing period Reading Hold:DH indicating the reading is hold Out of Range:OL indicating the current is out of range Auto Power-off:5 Minutes after power on, it will power off automatically to lower the power consumption Weight:120g（including the battery） Working Current:20mA Limit Temperature Error:-10℃～0℃及40℃～50℃，within 2%rdg Temperature and Humidity:Working: -10℃～50℃,below 80%rh :Storage: -10℃～60℃,below80%rh Insulating Strength:AC3700V/rms(between the alloy of the clamp and the housing) Applicable Safety Rules:IEC1010-1、IEC1010-2-032、Pollution degree 2、CAT Ⅲ(600V)

• ◆Function:Measurement of DC leakage current, DC current, car leakage
• ◆Test Mode:Clip-on CT，Magnetic modulation
• ◆ Range:0.0mA～6.00A DC
• ◆ Resolution:0.1mA DC
• ◆ Accuracy （23℃±3℃，below 70%RH）0.0mA～300.0mA DC: ±2%rdg±5dgt 0.30A～6.00A DC: ±2%rdg±5dgt